Newland NLS-PT60, User Manual

Page: 38 / 55

32
 Barcode Edit
 Prefix & Suffix
This feature allows you to append prefix/suffix to raw data. To set the prefix/suffix, enter the hexadecimal value of each
character in your desired prefix/suffix. For example, if you want to add
“123” before each barcode, set the prefix to
“0x313233”; if you want to add a Carriage Return character after each barcode, set the suffix to “0x0D”.
 Data Extraction
This feature allows you to output only a selected part of raw data.
To enable it, check “Extraction enable”. For example, if
you want to
output only “DE” in raw data “ABCDE”, enter “3” in the Start field and “4” in the End field.
 String Replace
This feature allows you to replace characters in raw data (up to 4 pairs of character replacements: Mode 1
– Mode 4). To
set the replacement string and the string to be replaced, select one of the four modes, tap
“Edit”, and then enter the
hexadecimal value of each character in the replacement string and the string to be replaced in the corresponding field (e.g.
if you want to replace “123” in raw data “12345” with “789”, enter “0x313233” in the String to be replaced field and “0x373839”
in the Replacement string field.