Newland NLS-HR32 Series User Manual Download Page 27

Page: 27 / 300

Connecting the Cradle to a Host

The cradle must be connected to a host in actual application, such as PC, POS or any intelligent terminal with USB or

RS-232 port, using a communication cable (USB or RS-232 cable).

USB

USB port on the Host

RS-232

RS-232 port on the Host

Note:

Please check the port on the host and purchase the cable accordingly.

Using USB Cable

Connect the cradle to a Host using a USB cable with RJ45 and USB connectors:

1. Plug the RJ45 connector of the cable into the data port on the cradle.

2. Plug the USB connector of the cable into the USB port on the Host.

3. Plug the supplied power adapter into the power jack on the cradle.

Summary of Contents for NLS-HR32 Series













































































































































































































































































































Search results

Summary of Contents for NLS-HR32 Series

Reviews:

Related manuals for NLS-HR32 Series

Brands by name

Popular brands

Newland NLS-HR32 Series, User Manual

Search results

Summary of Contents for NLS-HR32 Series

Reviews:

Related manuals for NLS-HR32 Series

Brands by name

Popular brands