Newland NLS-HR32 Series User Manual Download Page 2

Page: 2 / 300

Disclaimer

Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you

should keep this manual for future reference.

Do not disassemble the device or remove the seal label from the device, doing so will void the product warranty provided by

Fujian Newland Auto-ID Tech. Co., Ltd.

All pictures in this manual are for reference only and actual product may differ. Regarding to the product modification and

update, Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make changes to any software or hardware to improve

reliability, function, or design at any time without notice. The information contained herein is subject to change without prior

notice.

The products depicted in this manual may include software copyrighted by Fujian Newland Auto-ID Tech. Co., Ltd or third party.

The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble, decode,

reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders.

This manual is copyrighted. No part of this publication may be reproduced, distributed or used in any form without written

permission from Newland.

Fujian Newland Auto-ID Tech. Co., Ltd. reserves the right to make final interpretation of the statement above.

Fujian Newland Auto-ID Tech. Co., Ltd.

Newland Science & Technology Park, No.1 Rujiang West Rd., Mawei, Fuzhou, P.R.China

http://www.newlandaidc.com

Summary of Contents for NLS-HR32 Series













































































































































































































































































































Search results

Summary of Contents for NLS-HR32 Series

Reviews:

Related manuals for NLS-HR32 Series

Brands by name

Popular brands

Newland NLS-HR32 Series, User Manual

Search results

Summary of Contents for NLS-HR32 Series

Reviews:

Related manuals for NLS-HR32 Series

Brands by name

Popular brands