Newland HR1150-70, User Manual

Page: 63 / 185

** Enter Setup
53 Exit Setup
Sensitivity : This parameter specifies the degree of acuteness of the scanner
’s response to changes in
ambient illumination. The higher the sensitivity, the lower requirement in illumination change to trigger the
scanner. You can select an appropriate degree of sensitivity that fits the ambient environment.
High Sensitivity ** Medium Sensitivity
Low Sensitivity Custom Sensitivity
Sensitivity levels range from 0 to 255. The smaller the number, the higher the sensitivity.
Example: Set the sensitivity level to 10
1. Scan the Enter Setup barcode.
2. Scan the Custom Sensitivity barcode.
3. Scan the numeric barcodes
“1” and “0”. (See the
Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.