Newland HR1150-70, User Manual

Page: 148 / 185

** Enter Setup
Exit Setup 138
Set Length Range for Codabar
The scanner can be configured to only decode Codabar barcodes with lengths that fall between (inclusive)
the minimum and maximum lengths.
The supported maximum length is 255 characters. If minimum length is set to be greater than maximum
length, the scanner only decodes Codabar barcodes with either the minimum or maximum length. If
minimum length is same as maximum length, only Codabar barcodes with that length are to be decoded.
Set the Minimum Length Set the Maximum Length
Example: Set the scanner to decode Codabar barcodes containing between 8 and 12 characters.
1. Scan the Enter Setup barcode.
2. Scan the Set the Minimum Length barcode.
3. Scan the numeric
barcode “8”. (See the
Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Set the Maximum Length barcode.
6. Scan the numeric
barcode “1”.
7. Scan the numeric
barcode “2”.
8. Scan the Save barcode.
9. Scan the Exit Setup barcode.