Newland HR1150-70, User Manual

Page: 164 / 185

Exit Setup 154
Chapter 6 Safety Information
Electrical Safety
1. Use only the supplied power adapter. Otherwise there is a risk of damage to the scanner.
2. To avoid risk of electric shock, do not attempt to disassemble or modify the supplied power adapter
yourself.
3. Use only a dry soft cloth to clean the scanner and power adapter. Cleaning them with wet cloth may
cause electric shock or damage to the devices.
4. If there is unusual odor, overheating or smoke when using the scanner, immediately cut off the power
and disconnect the power adapter, and contact your dealer or Newland customer service center.
Continued use in this case may result in fire or electric shock.
5. Keep the scanner and its accessories away from fire and heat sources. Keep them from moisture.
Photobiological Safety
The scanner complies with the requirements of IEC 62471. The scanner has no lasers. It uses LEDs to
produce illumination and aiming beams. The LEDs are bright, but testing has been done to demonstrate
that the scanner is safe for its intended application under normal usage conditions. However, the user
should avoid looking into the beam.
Electromagnetic Compatibility (EMC)
The scanner meets the requirements of EN 55032:2015 and EN 55024:2010.
Note: The scanner contains ESD (Electrostatic Discharge) sensitive components and circuits. Static
control precautions are required when using this device. Device damage may result if ESD control
procedures are not followed. Any ESD-related malfunctions should be reported to the technical support.
Others
1. Do not attempt to disassemble or retrofit the scanner yourself. Unauthorized disassembly or retrofit will
void the warranty.
2. If any malfunction occurs while using the scanner, immediately cut off the power and contact your
dealer or Newland customer service center.