background image

“LCD-1”

 

Liquid

 

Coffee

 

Dispenser

 

NEWCO Enterprises              Phone: 1.800.325.7867 Fax: 1.636.925.0029     7.22.09 

29 of 29 

PN: 121314 

WARRANTY 

Applies to all equipment manufactured after 2/1/2017. This warranty supersedes  

all other previous warranties that are currently in manuals. 

 

Newco warrants equipment manufactured by it for 1 year parts and labor. 

Accessories and Dispensers 1 Year parts only. 

Electronic Circuit and Control Boards- 3 years parts, 1 year labor. 

Equipment manufactured by others and distributed by Newco- please see original 

equipment manufacturers warranty, Newco will follow. 

 

These  warranty  periods  run  from  the  date  of  sale  Newco  warrants  that  the  equipment 

manufactured  by  it  will  be  commercially  free  of  defects  in  material  and  workmanship 

existing at the time of manufacture and appearing within the applicable warranty period. 

This  warranty  does  not  apply  to  any  equipment,  component  or  part  that  was  not 

manufactured  by  Newco  or  that,  in  Newco’s  judgment,  has  been  affected  by  misuse, 

neglect, alteration, improper installation or operation, relocation or reinstallation, improper 

maintenance  or  repair,  incorrect  voltage  applied  to  the  unit  at  any  time,    damage  or 

casualty.  This  warranty  does  not  apply  to  any  equipment  failures  related  to  poor  water 

quality, excessive lime and chlorine and non periodic cleaning and descaling. Warranty is 

null  and  void  if  muriatic  or  any  other  form  of  hydrochloric  acid  is  used  for  cleaning  or 

deliming.  In  addition,  this  warranty  does  not  apply  to  replacement  of  items  subject  to 

normal use including but not limited to user replaceable parts such as faucet seat cups, 

sight gauge tubes, washers, o-rings, tubing, seals and gaskets.  

 

This warranty is conditioned on the Buyer 1) giving Newco prompt notice of any claim to 

be  made  under  this  warranty  by  telephone  at  (800)  556-3926  or  by  writing  to 

3650  New 

Town  Blvd,  Saint  Charles,  MO  63301

;  2)  if  requested  by  Newco,  shipping  the  defective 

equipment  prepaid  to  an  authorized  Newco  service  location;  and  3)  receiving  prior 

authorization from Newco that the defective equipment is under warranty. 

 

THE  FOREGOING  WARRANTY  IS  EXCLUSIVE  AND  IS  IN  LIEU  OF  ANY  OTHER 

WARRANTY, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED 

TO,  ANY  IMPLIED  WARRANTY  OF  EITHER  MERCHANTABILITY  OR  FITNESS  FOR  A 

PARTICULAR PURPOSE. The agents, dealers or employees of Newco are not authorized to 

make modifications to this warranty or to make additional warranties that are binding on 

Newco.  Accordingly,  statements  by  such  individuals,  whether  oral  or  written,  do  not 

constitute warranties and should not be relied upon. 

 

If  Newco  determines  in  its  sole  discretion  that  the  equipment  does  not  conform  to  the 

warranty,  Newco,  at  its  exclusive  option  while  the  equipment  is  under  warranty,  shall 

either 1) provide at no charge replacement parts and/or labor (during the applicable parts 

and labor warranty periods specified above) to repair the defective components, provided 

that this repair is done by a Newco Authorized Service Representative; or 2) shall replace 

the equipment or refund the purchase price for the equipment. 

 

THE  BUYER’S  REMEDY  AGAINST  NEWCO  FOR  THE  BREACH  OF  ANY  OBLIGATION 

ARISING  OUT  OF  THE  SALE  OF  THIS  EQUIPMENT,  WHETHER  DERIVED  FROM 

WARRANTY  OR  OTHERWISE,  SHALL  BE  LIMITED,  AT  NEWCO’S  SOLE  OPTION  AS 

SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. 

 

In no event shall Newco be liable for any other damage or loss, including, but not limited 

to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of 

capital, cost of down time, cost of substitute equipment, facilities or services, or any other 

special, incidental or consequential damages. 

Summary of Contents for LCD-1






























Reviews: