“LCD-1”
Liquid
Coffee
Dispenser
NEWCO Enterprises Phone: 1.800.325.7867 Fax: 1.636.925.0029 7.22.09
13 of 29
PN: 121314
When sanitizing cycle ends, remove the sanitizing solution
and replace the coffee BIB product. The machine will
automatically advance to the Prime Pumps mode.
To Prime: Press and hold the “Start” (+) switch until a steady
stream of product flows from the dispense area into the
vessel.
Press and release the “Enter” Switch until 3 dashed lines
appear in the display.
Discard the contents of the decanter or vessel.
Prime Pump Feature:
This feature allows you to enter directly into a Prime Pump
mode without sanitizing.
Press the
-
switch to enter the Prime Pump mode.
Follow the same Prime Pump procedures from Sanitizing
Instructions.
BIB Counter Auto-Reset Feature:
If enabled during the “Set-Up Programming” of the machine
a buzzer alarm will sound once per second to indicate that
the product BIB is empty.
Entering into a Prime Pump mode turns off the alarm.
BIB tracking is automatically reset when the pump is primed.