SERIER 2
1. Black 9-pin jack connect 9-pin plug of series 1
2. USB end connect the USB jack of computer for touch screen .
3. VGA signal input connect VGA end of the computer
CONECTION
Put the SKS jack of matched cable seriess1 into the AV input jack of the
monitor after checking the contact is good, the other jack of A/V cable should
be connected with related signal input as follows
1. Black 9-pin plug of series 1 is connected to the 9-pin jack of series 2 (note
the right direction of arrowhead), the VGA signal of series 2 will be
connected to the VGA jack at the back of computer, then tighten the
screws .
2. Yellow RCA jack video signal 1 input
3. Red RCA jack video 2 input
4. White RCA jack audio signal input
5. Black jack DC12v power input
6. When you use the unit, please adopt matched DC adapter, if not, please
note that the power consumption should be exceed 15w. For TV signal
please put the external ANT or CATV signal connecter in the external
antenna input jack.
MENU OPERATION
After connecting power, the unit will be in standby state. Press ‘power’ on
the unit or on the remote controller, the unit begins to work and press PC/AV
on the unit or AV/TV on the remote controller to switch the inputted mode
among AV, TV, PC mode. Press the same button again the unit will return to its
standby state.
When the unit is working press “MENU” and the main menu will appear on
the screen as picture show. Press “</>”on the unit or “^/V” on the remote
controller to select the item you demanded and press MENU to confirm,
meanwhile the secondary will display. Note if no further operation the menu will
disappear in ten sends.
