Proprietary to NeWave® Sensor Solutions 1.0
14
11. Next, unravel the 25’ cable and feed up-and-over the dock door. Attach the 90-degree end
to Ports 3 and 4 on the Impinj R420 Reader. (Zip ties work best for attaching the cables
over the dock door)
12. Replace the access panel on the B-Panel.
13. The smartPORTAL and its reader is
powered by ethernet, or POE
. The last step is to
plug an ethernet cable into the POE drop at the dock door and into the Impinj R420
Reader.
14. Check to make sure the lights are flickering at each of the antenna ports and at the
ethernet jack.
15. Configure the reader to the identified Static IP Address.
16. Replace the access panel on the A-Panel and your SLS smartPORTAL is ready to
operate.
