H.264 Pentaplex DVR
30
3.2.5. MOTION
This menu allows you to set motion detection area for
motion recording. To start a motion trigger recording,
RECORD-> POLICY->MOTION
must be
enabled.
1) SENSITIVITY [LEVEL 1 – LEVEL 10]
The higher level is more sensitive to detect motions.
2)
AREA [FULL / SETUP]
FULL
: Motion will be detected from full viewing
area.
POSITION
: You can setup the detection area
manually. To set up the area, go to
POSITION
menu.
To set up Motion Recording, you will need to do three (3) essential
steps. These steps does not have to be in these necessary order
but must be executed for Motion Recording.
1. Under Record menu, scroll down and click the Motion tab.
After clicking, you will be in Motion Detection page. Under
Mode tab, you will need to enable it (ON)
2. Next, go to Record Schedule. From this page, you can set the
days, hours and channels for event.
3. Lastly, you will set need to set the policy. Under Record menu,
click on the Policy tab. This will take you to the Policy page.
Under Schedule, enable it by clicking it to ON.
