NRP1012 Series IP Phone User Manual
www.newrocktech.com 5-1
5
Web Page Setting
5.1 Configuration Introduction
5.1.1 Configuration Methods
Users with different using habits can configure the NRP1012/P by means of:
Phone keypad
Web browser (recommended)
Telnet with CLI command
5.1.2 Password Configuration
The browser and command lines of the phone can be set in either of the two modes: guest mode and
administrator mode. In the administrator mode, users can both view and modify all options as needed;
whereas in the guest mode, users can only view the SIP (1-2) and IAX 2 options, and the IP address and
port of the server. The username and password for entering different modes are different.
Guest mode:
Username:
guest
Password:
guest
Administrator mode:
Username:
admin
Password:
admin
The default password of phone screen menu is 123.
5.2 Setting the NRP1012/P through a Web Browser
When both the NRP1012/P and your PC are connected to the network, enter the IP address of the WAN
port of the NRP1012/P as the address bar. The IP address of the NRP1012/P can be obtained by
pressing the navigation key (such as http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).