NRP1012 Series IP Phone User Manual
New Rock Technologies, Inc. 5-35
re-issues the dial tone, the user continues to enter the number, after the end of the closing number, the
phone number will be prefixed and analog secondary dial tone is sent to the back of the numbers
together with the server.
For example:
If the plan
9, xxxxxxxx
is configured in the dial plan table, when you dial
9
, the system re-plays the
dial tone, prompting you to continue to dial the number. After the dial-up, the phone sends out a 9-digit
number containing the number
9
.
Figure 5-21 Dial plan setting interface
Table 5-20 Dial plan parameters setting
Name Description
Basic Setting
Press "#" to Send
Indicates that you need to press # after dialing a number.
Dial Fixed Length Indicates that the phone will automatically call out after the number with a specified
length is dialed. For example, if the value is set to 11,
Press # to Do
Blind Transfer
Enables the phone to transfer the incoming call to a specified number (the third party)
after
#
is pressed. This function requires you to press
#
after inputting the phone
number of the third party.
Blind Transfer on
OnHook
Enables the phone to transfer the incoming call to a specific number (the third party)
after hang-up. This function requires you to input the number of the third-party before
hang-up.
Attend Transfer
on OnHook
Enables the phone to transfer the incoming call to a third party after the call is
answered.
5.6.4 Contact
This function is equivalent to the phone book, recording the contact name, phone number, and ring
tone.