Behaviourincaseoferrors
24
SA3-SInstallation&CommissioningManual
8
Behaviourincaseoferrors
An error is indicated by the lighting of the error lamp or the flashing of the (external or internal) 7-segment dis-
play. The flashing error number provides indication of the location at which the error may have occurred.
If an error occurs, rectify the error with the aid of the error number (see chapter "Display"). If that is not possible,
please contact the system supplier.
The following steps must be performed to reset a detected error:
1.
Theerrorlamplightsupandthedisplayflashestheerrorcode
2.
Rectifytheerror.Indoingso,thedisplayonthesafetydevicemaybeofassistance(seechapter"Dis-
play")
3.
Activatetheerrorresetinput(pressandholdtheresetbutton)orplaceastrongpermanentmagnet
(e.g.,BP15fromtheSchmersalcompany)underthedisplay.
4.
Allsegmentsofthedisplayarethenswitchedon(displayshows"88").Abrieftimelater,thedisplay
goesdarkandtheerroroutput(errorlamp)switchesoff.
5.
Younowhavetwosecondsinwhichtoreleasetheresetbuttonortoremovethemagnet.Theerroris
resetonlyduringthistimewindow.
6.
If,followinganerrorreset,thedisplaycontinuestoflashoriftheerroroutputisactive,allerrorshave
notyetbeenrectified.Repeattheresetprocedureuntilnofurthererrorsaredisplayed.
Comment on the magnet:
At the marked location on the bottom of the internal display is a magnet sensor which triggers the reset proce-
dure. If the reset does not function reliably, try changing the orientation of the magnet.
