9
5
6
8
7
Attach pump head by twisting and locking
into place following the open and close
markings until it is tightly attached.
Squeeze the hand pump until the unit
becomes moderately firm. The valve must
be in the closed position before the adapter
is attached for this to stay inflated.
Remove the adapter by reversing the
attachment step. The valve should remain
in the closed position.
Twist and lock filling cap into place and
ensure it is securely tightened once cap is
locked, using a towel or cloth, wipe dry any
excess water from the exterior of the bell unit
To use the product in its dual orientation,
take the threaded adapter and screw in to
the underside of each base, one at a time
until feeling a click to ensure both sides
of the unit are in the locked position. Rest
units against floor or upright surface whilst
doing so for added support under weight.
Insert base and handle stem until threads
meet. Twist into position until feeling a
click. This will ensure it is locked in to
position.
When finished using the product
and ready to empty, reverse steps to
remove handle parts. Returning the
unit back to sink or outdoor space,
unlock the cap and open the valve
being careful not to spill water when
doing so.
Slowly squeeze the water from the
unit and drain away. Ensure as much
air & water as possible is removed
from the unit, shaking out any residual
water. Return filling cap ready to store
for next use.
7
Summary of Contents for FITT BELL
Page 3: ...3 ...
