New Image FITT BELL, Assembly And User'S Manual

Page: 6 / 12

HOW TO USE:
When ready to set-up, remove locking cap
and depress valve button so it is set to the
open position.
If the bell is deflated fully, inflate slightly
with hand pump provided. This will help
the water filling process - Attach the pump
head by twisting and locking into place
following the open and close markings until
it is tightly attached. Pump the hand pump
until the unit becomes slightly inflated.
Ensure the Valve remains in open after any
initial inflation.
Note: To check valve is open,
air should flow freely out when
the bell unit is squeezed.
1 2
3
4
When ready to fill, place the vessel in
sink or outdoor area (if using an outdoor
tap). Angle the unit with the valve facing
upwards towards the water source and fill
with water slowly to the desired quantity,
checking fill level until happy.
If the water starts to bubble around the
valve when filling, carefully squeeze out
excess air to allow for easy water flow.
Note: The top fill line should not be
exceeded to avoid spilling when closing.
When filled to desired level, depress valve
button so it is in the closed position
(see p5)
6