New Holland PS2045, Service Manual

Page: 16 / 31

INTRODUCTION
Welding work
• Use the proper PPE for this activity: mask, gloves and
a leather apron.
• In case of electric welding: always seek to connect the
negative electrode near the point to be welded.
• Only perform welding in well ventilated areas to avoid
the concentration of toxic gases and dust.
• Before welding, remove the paint, thus preventing the
formation of toxic gases and dust.
If you cannot remove the paint, use an appropriate
mask to protect against the inhalation of toxic gases.
When sanding surfaces, especially with paint, also
wear a mask.
If you use a solvent to remove the paint, do not forget
to wash the area with soap and water before welding:
fire hazard!
SEM19101776
20
47918066 10/09/2015
11