New England Arbors Cambridge Raised Planter Extension Kit Assembly Instructions Manual Download

Page: 5 / 7

The Cambridge Raised Planter Box Extension

STEP T WO (CONT’D)

Fasten the wall panel into place using the screws set aside from

Step One as shown.

Fasten the Center Posts into place using the provided

5/8”

(16 mm)

screws (five per post).

The Cambridge Raised Planter Box Extension

Center & fasten the Shelf Rails onto the Wall Panel using the

screws set aside from Step One as shown.

5/8”

(16 mm)

Screws

5/8”

(16 mm)

Screws

1 1/2”

(38 mm)

Screws

5/8”

(16 mm)

Screws

Assemble the extension kit as shown below.

Summary of Contents for Cambridge Raised Planter Extension Kit

Page 2: ...o assist with retrofitting an extension kit to your existing raised planter box Some disassembly of the raised planter box will be necessary Please look over both sets of instructions for total scope The Cambridge Raised Planter Box Extension Cambridge Raised Planter Box Extension Kit ...

Page 5: ...sten the Center Posts into place using the provided 5 8 16 mm screws five per post 5 The Cambridge Raised Planter Box Extension 6 Center fasten the Shelf Rails onto the Wall Panel using the screws set aside from Step One as shown 7 5 8 16 mm Screws 5 6 5 8 16 mm Screws 1 1 2 38 mm Screws 5 8 16 mm Screws 8 Assemble the extension kit as shown below ...

Page 6: ...6 mm screws provided 10 total into the pre drilled holes on the center posts Attach the Extension Kit 1 The Cambridge Raised Planter Box Extension 5 8 16 mm Screws 5 8 16 mm Screws 5 8 16 mm Screws Place the eight floor panels onto the floor supports as shown Note the notches on the one side of the end panels Notch Notch ...

Page 7: ...tension Pressure fit the Post Caps into place Push firmly until they snap into place 3 7 STEP THREE CONT D North America Toll Free Phone 1 800 282 9346 United Kingdom Tel 44 2038 687160 www newenglandarbors com www newenglandarbors co uk ...