THE MANUFACTURER RESERVES THE RIGHT TO CHANGE THE CONFIGURATION,
TECHNICAL OR ANY OTHER PARAMETERS WITHOUT PRIOR NOTICE
TUNER&CHANNEL
DECODER
TRANSPORT STREAM
PROFILE LEVEL
VIDEO PROFILE
AND LEVEL
INPUT RATE
VIDEO FORMATS
AUDIO FORMAT
VIDEO OUTPUT
MEDIA PLAYER
CONNECTION
MAIN POWER CABLE
TUNER
POWER SUPPLY
HDMI x 1; SCART x 1
USB 2.0 FULL SPEED x 1
ANTENNA INPUT x l
FIXED TYPE
MP3/JPEG/BMP
SCART, HDMI
MPEG Layer l & ll, Dolby Digital Plus (E-AC3)
4:3/16:9 SWITCH ABLE
Max. 80Mbit/S @ MPEG2
MPEG-4 AVC/H.264
MPEG-1 MPEG-2 MP@ML
MPEG-2 ISO/IEC 13818-1
SIGNAL LEVEL: - 10 - 70 dbm
(UHF)
174MHz 230MHz(VHF) 470MHz-862MHz
FREQUENCY RANGE
RF INPUT CONNECTOR xl
USB
HDMI; SCART
INPUT VOLTAGE
STANDBY CONSUMPTION
POWER CONSUMPTION
MAX. 6W (USB Max Load: DC 5V, 300mA)
MAX. 0.5W
220 -240v 50/60HZ
PROBLEM
Potential reasons
What to do
No picture
Screen shows
No Signal
No sound from
speaker
Only sound, no
image on the screen
Remote Control
is not responding
Picture is breaking up
Power isn’t connected
The power switch is not on
Aerial cable is faulty
No or incorrect connection with audio cable
Sound on mute
No or incorrect connection with AV cable
The program is a radio program
The battery is exhausted
Remote Control is not facing or close enough
to the Set Top Box
The signal is too weak
Connect the power.
Switch on the power
Check aerial cable and connections
Connect the audio cable correctly
Turn off mute function
Make sure cables are connected correctly
Press <TV/RADIO> key to shift into TV mode
Change battery
Adjust the position of the Remote Control
and move closer to the unit
Check aerial cable and
connections
TROUBLESHOOTING
www.newdigital.lt
EN