Operation
New Brunswick Innova
®
2000/2050 Shaker
English (EN)
24
Abb. 5-1: Recorder connector as seen from the rear of the unit
Fig. 5-1:
Recorder connector as seen from the
rear of the unit
• For speed, each channel should have signal
conditioning that accepts 0 – 5
V
input.
• For temperature, each chanel should have a
signal conditioning that accepts 0
–
5
V
input
• A mating connector is required on the recorder
cable (not supplied, but available from
Eppendorf). This is a 9-pin male D subminiature
connector, AMP Amplimite HDP-20 series or
equivalent.
Pin number
Signal name
Scale
6
Speed
1
V = 100
rpm
2
Ground
7
Temperature
1
V = 20
°C
3
Ground
5 4 3 2 1
9 8 7 6
