13
Product description
New Brunswick Innova
®
2000/2050 Shaker
English (EN)
3.4.2
Keypad
3.4.3
Status indicators
3.4.4
Function indicators
3.5
Platform assemblies
Neither the Innova 2000 nor the 2050 can be used without a platform. One must be purchased and installed
on your shaker prior to operation (see
Platforms on p. 31)
.
The Innova 2000 can be used with a wide range of New Brunswick 28
cm
x
33
cm
(11
in
×
13
in)
platforms,
which will accept a variety of clamps for flasks, test tubes, etc (see Tab. on p. 31).
The Innova 2050 can accommodate an even wider range of New Brunswick 30.5
cm × 40.6
cm
(12
in
x
16
in) platforms, which will accept a variety of clamps for flasks, test tubes, etc (see Tab. on p. 31).
START/STOP
• Starts and stops the drive
• Activates or stops timer when timed run is desired
Keys
• Adjusts the setpoint of a displayed parameter up or down
• Used to enter the SET mode for setpoint changes
SELECT
• Changes the displayed parameter
• Temperature (°C) cannot be selected unless the temperature/remote monitoring
option is installed.
MAINT
• Illuminates after 10000 hours of use. Indicates need for routine maintenance (see
Routine maintenance on p. 25)
SET
Illuminates to indicate that:
• Shaker is in SET mode
• Setpoints are being displayed
• Setpoints can be altered
TIME
• Illuminates to indicate that the timer is in operation
MUTE
• Illuminates to indicate that the audible alarm is disabled
RPM
Revolutions per minute shaking speed
HRS
Time remaining
°C
Temperature function (only activated of the temperature/monitor option is installed)
*
This function is not active in the Innova 2000/2050
