Rev. 00 of 12.06.09
9/18
2 . 1
– T u r n i n g d e v i c e o n
To activate ß
LASER
, switch-on the rear switch, check that the emergency
button is released, turn the switch-on key. An initial screen appears on the
display presenting the device including: the name of the appliance version,
the
START
key and the
CONFIGURE
key.
2 . 2
– S e l e c t i o n o f p r o g r a m t y p e
ß
LASER
can operate in 3 different modes:
1-
Free manual mode
2-
Pre-set program mode
3-
Personal program mode
2.2.1
- F ree m anual mode
Press
START
on the initial screen to access the
manual mode area. In this
area, by
TURNING THE KNOB
you can vary the value of the parameter
selected, whereas by
PRESSING THE KNOB
you pass from one parameter
to the next. The concerned parameters are: type of emitted wave, supplied
power, therapy duration, duty cycle of the generated wave.
2.2.2
- Reset pro gram mod e
Press
START
on the initial screen (touch screen) to access the work area.
Then press
PROGRAMS (
on touch screen
)
to enter the Menu for choosing
specific protocols where first of all the therapy to be used is selected, by
turning the encoder and then pressing
ENTER (
touch screen
)
or else
PRESSING THE KNOB
to confirm the program selected.
2.2.3
- P ersonal program mode
The custom-made programs are at the bottom of the list of pre-set programs.
Press
START
on the initial screen (touch screen) to access the work area.
Then press
PROGRAMS (
on touch screen
)
to enter the Menu for choosing
specific protocols. At the bottom of the list first of all the therapy to be used
is selected, by turning the encoder and then pressing
ENTER (
touch screen
)
or else
PRESSING THE KNOB
to confirm the program selected.
Summary of Contents for Hi-Laser Beta LASER
Page 2: ...Rev 00 of 14 01 10 2 24...
