New Age Hi-Laser Beta LASER Manual Download Page 16

Rev. 00 of 12.06.09 

16/18 

Ca p.8

 

–   WA RNING S  

 

  Pay  special  attention  to  use  of  the  knobs  in  order  not  to  jeopardise  the 

effectiveness of the treatment. 

  Use  the  device  only  with  electrical  systems  compliant  with  Safety 

Standards in force. 

 The device has IP20 protection rating (see chap. “Technical features”). It 

must  not  be  used  in  the  immediate  vicinity  of  liquids  because  it  is  not 
protected from their entrance. 

 Do not use the device in the immediate vicinity of mobile phones  (keep 

them at least a few meters away). 

  Operating  near  (for  example  1  metre  away)  a  short  wave  or  microwave 

therapy device can cause instability in the output of the stimulator. 

  Do not  connect  the patient  with  ß  LASER and  an HF  surgical  device at 

the same time, to avoid danger for the patient and for the device itself. 

 The device works according to its specifications if the atmosphere is kept 

at a temperature between 5° and 40° C and less than 80% humidity. The 
same conditions must be maintained during transportation and storage. 

 In case of malfunctioning and failures, do not use the device but send it to 

be repaired. 

 Do not operate near flammable substances.  

 Do not use gel and accessories other than those supplied. 

  It  is  of  the  utmost  importance  to  inform  the  patient  about  the  type  of 

sensations  which  must  be  perceived  during  the  therapy.  Should  he 
perceive  that  the  sensation  is  no  longer  the  correct  one,  you  must 
intervene  immediately,  stopping  the  session  by  the  controls  and 
disconnecting the solenoids. 

 If  the intensity of the output set or its regulation cause excessive heating 

or pain in the treated zone, the intensity must be reduced immediately or 
the application must be stopped. 

 Keep the device out of the reach of children. 

 

  Both  the  patient  and  the  operator  must  compulsory  always  wear 

protective goggles included in the basic supply. 

  The  device  must  only  be  used  inside  closed  premises,  adequately 

protected against random access of unauthorised personnel 

Summary of Contents for Hi-Laser Beta LASER



















Reviews: