NeuroSky MINDWAVE MW3, Quick Start User Manual

Page: 8 / 27

Quick Start Guide - For iOS & Android
7
For iPhone, iPad, iPod & All Android-Based Mobile Devices
1
Turn on the headset. It should automatically go
into pairing mode with the LED light flashing blue.
If this does not occur, hold the power switch in
the “ON” position for 3 seconds until the light
flashes. The headset is now in pairing mode.
2
Once in pairing mode, refer to your iOS or Android
Bluetooth™ pairing procedure.
3
Select the “MindWave Mobile” device when it
appears. For Android devices enter “0000” as the
Bluetooth authentication key if prompted.
4
The device and headset should now be successfully
paired and the headset's light will turn solid blue.
The headset is now ready to connect to this iOS or
Android device from now on
*The MindWave can remember up to three devices. To clear
the memory hold the switch in pairing mode for ten seconds.
5
Go to the iTunes App Store or Android Market,
and search for “NeuroSky”
6
Download from the list of NeuroSky enabled
applications. We recommend downloading
“Welcome to MindWave” first to get an interactive
walk through of how to use the EEG commands.
7
Enjoy your MindWave Mobile!
Switch LED