Using Your MindWave
- Fitting the MindWave Mobile
4)
Make sure the two metal contacts on the inside of both sides of the
earclip make skin-contact with your earlobe or ear. Move any hair or
obstructions (such as jewelry) out of the way. Readjust the earclip as
necessary to make proper contact with the skin of your ear. You may
need to squeeze the ear clip against your ear for a few seconds.
5)
Adjust the forehead Sensor Arm of the headset so that the Sensor
Tip makes contact with the skin of your forehead. This Sensor Tip
must maintain steady skin contact in order to properly measure
your brainwaves, it will not work through hair. The Sensor Tip should
sensor – the sensor must be able to directly contact the skin at all
times. Make up, dead skin, or debris can interfere with the connection.
Scratch or wipe the obstruction away if you have trouble obtaining a
clean signal.
6)
This is how the MindWave should look when properly worn.
During usage, if you are not receiving a signal, repeat the steps above
to make minor adjustments to ensure the sensor and contacts have
proper skin contact.
Note
If you are having a problems with the signal quality, carefully
recheck all the instructions above, and then try sitting still for a few
seconds. Note that talking can sometimes interfere with the signal
quality as well. If this does not work, check that your head is not within
a few feet of a strong electrical device (like a laptop adapter or an
electrical outlet).
Step 4
Step 6
18
Summary of Contents for MINDWAVE MW3
Page 1: ......