77
Neural Capture
Set your microphone position and tweak the device parameters to
your liking.
Capture process
Here you can modify the levels in order to get a better
performance during the Capture process.
• INST LEVEL
KNOB: Sets the input gain of the instrument signal
• IN 1 LEVEL
KNOB: Sets the input gain of the microphone
signal.
• GROUND LIFT
SWITCH: Enable them in order to reduce or
eliminate the ground-related noise arising from ground loops in
audio cables or other sources.
• TYPE SWITCH
: Toggles between “Mic” and “Instrument”
inputs. Use “
Instrument
” if the device being captured is
connected to Quad Cortex with a TS cable. Use “
Mic
” if the
device being captured is connected to Quad Cortex with an XLR
cable.
• PHANTOM SWITCH
: Enables the Phantom Power (48v).
Cancel
Neural Capture
●
Please verify your Quad Cortex is properly connected to the target device.
●
Reduce levels if any of the meters detect clipping.
●
The IN 1 GROUND LIFT can mitigate noise caused by ground loops between Quad Cortex
and the target device.
START CAPTURE
CONNECTION DIAGRAM
Off
On
GROUND LIFT
0.00
IN 1 LEVEL
0.71
INST LEVEL
Instrument
Mic
TYPE
Off
On
PHANTOM
0
dB
0.71
LEVEL
0
dB
AUTO-SET
The
INST LEVEL
knob should be
set as loud as possible without
clipping (-10dB or higher if
possible).