39
Presets
• RECORD
: Starts recording. It arms the looper for recording
if the threshold function is enabled. This control is called
OVERDUB during playback.
• OVERDUB
: Starts recording during playback. The recorded
signal is added on top of the existing recorded audio. This
allows you to layer additional parts into a loop to create a
more complex result.
• PLAY
: Starts/Stops the playback.
• REVERSE
: Rewinds the loop during playback. Using REVERSE
before playback will start the loop backward after pressing
PLAY.
• UNDO
: Undo the last action. This control is called REDO
after use. The REDO function restores any actions that were
previously undone using UNDO.
Params Mode
Use Params mode to access the Looper X settings. The controls
are organized in three pages and linked to the Quad Cortex upper
encoders. You can always use the touchscreen.
• PLAYBACK LEVEL
KNOB: Adjusts looper playback level.
• OVERDUB LEVEL
KNOB: Sets the level of your loop while
overdubbing. For example, if the overdub level is set to -5dB,
its volume will be reduced by -5dB each time the loop repeats,
sounding quieter with each overdub take.
• HIGH PASS
KNOB: Allows high frequencies to pass through
while filtering or cutting low frequencies of the playback.
• LOW PASS
KNOB: Allows low frequencies to pass through while
filtering or cutting high frequencies of the playback.
• THRESHOLD
KNOB: Allows the recording function to trigger
when an audio signal is detected. This function will be disabled
when the Looper X is receiving MIDI clock.
PAGE 1