113
F.A.Q.
Yes. Input impedance and gain are adjustable via the I/O Settings
screen.
Do the inputs support a variety of powered
instruments?
Most tube amplifiers have distinct tonal properties, so using Quad
Cortex with an FRFR device is the best way to take full advantage
of the tonal capabilities without introducing undesired tone
coloration.
If you want to use Quad Cortex with a tube or solid-state amp, we
recommend trying the
4 Cable Method
.
This feature works by connecting Quad Cortex to external devices
by using a modified instrument cable (TRS and TS ends). Connect
the TRS tip to the Quad Cortex and the TS tip to the external
device.
These cables do not eliminate noise, but they can significantly
reduce hum caused by ground loops.
Both Sends 1 and 2 support this feature.
How can I take advantage of the ground-
cancelling outputs (Send 1-2)?
IN
SEND 1 OR SEND 2
TS
TRS
Preset changing will incur in the inevitable familiar gap. You can
use
Scene
and
Stomp modes
to change sounds while maintaining
delay trails without any crossfade/gaps.
Is there gapless switching between Scenes
& Presets?