background image

During the drying phase, the door opens

automatically and remains ajar.

Caution! Do not try to close the

appliance door within 2 minutes after

automatic opening. This can cause

damage to the appliance.

AirDry is automatically activated with all programmes
excluding 

.

Caution! If children have access to the

appliance, it is advised to deactivate

AirDry as opening the door may pose a

danger.

How to deactivate AirDry

The appliance must be in programme selection mode.
1. To enter the user mode, press and hold the

programme button until the indicator 
flashes and indicators 

 and 

 are on.

2. Press the programme button twice.

• The indicators 

 and 

 are on.

• The indicator 

 flashes.

3. Wait until the indicators 

 and 

 are off.

The indicator 

 still flashes.

• The 

 indicator shows the current setting:

 off = AirDry is deactivated.

4. Press the programme button to change the setting.

 on = AirDry is activated .

5. Press on/off to confirm the setting.

Before first use

1. Make sure that the current level of the water

softener agrees with the hardness of the water

supply. If not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance. Do

not use detergent and do not load the baskets.

After starting a programme, it may take up to 5 minutes

for the appliance to recharge the resin in the water

softener. It seems that the appliance is not working. The

washing phase starts only after this procedure is

completed. The procedure is repeated periodically.

The salt container

Caution! Use rough salt designed for

dishwashers only. Fine salt increases the

risk of corrosion.

The salt is used to recharge the resin in the water

softener and to assure good washing results in daily

use.

How to fill the salt container

1. Turn the cap of the salt container counterclockwise

and remove it.

2. Put 1 litre of water in the salt container (Only for the

first time).

3. Fill the salt container with dishwasher salt.

4. Remove the salt around the opening of the salt

container.

8

Summary of Contents for IDSH604W





















Reviews: