background image

• Detergent tablets do not fully dissolve with short

programmes. To prevent detergent residues on the

tableware, we recommend that you use the tablets

with long programmes.

• Do not use more than the correct quantity of

detergent. Refer to the instructions on the detergent

packaging.

What to do if you want to stop using multi-tablets

Before you start to use separately detergent, salt and

rinse aid do the following procedure.
1. Set the highest level of the water softener.

2. Make sure that the salt and rinse aid containers are

full.

3. Start the shortest programme with a rinsing phase.

Do not add detergent and do not load the baskets.

4. When the programme is completed, adjust the

water softener according to the water hardness in

your area.

5. Adjust the released quantity of rinse aid.

Loading the baskets

• Only use the appliance to wash items that are

dishwasher-safe.

• Do not put in the appliance items made of wood,

horn, aluminium, pewter and copper.

• Do not put in the appliance items that can absorb

water (sponges, household cloths).

• Remove larger residues of food from the dishes into

the waste bin.

• Make soft the remaining burned food on the items.

• Put hollow items (cups, glasses and pans) with the

opening down.

• Make sure that glasses do not touch other glasses.

• Put cutlery and small items in the cutlery basket.

• Put light items in the upper basket. Make sure that

the items do not move.

• Make sure that the spray arms can move freely

before you start a programme.

Before starting a programme

Make sure that:
• The filters are clean and correctly installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid (unless you

use multi- tablets).

• The position of the items in the baskets is correct.

• The programme is applicable for the type of load

and for the degree of soil.

• The correct quantity of detergent is used.

Unloading the baskets

1. Let the tableware cool down before you remove it

from the appliance. Hot items can be easily

damaged.

2. First remove items from the lower basket, then from

the upper basket.

At the end of the program water can still

remain on the sides and on the door of

the appliance.

Care and cleaning

Warning! Before maintenance,

deactivate the appliance and disconnect

the mains plug from the main socket.

Dirty filters and clogged spray arms

decrease the washing results. Make a

check regularly and, if necessary, clean

them.

Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise and remove it.

11

Summary of Contents for IDSH604W





















Reviews: