NEU MASTER NTC0120, User Manual

Page: 6 / 8

WARNING!
WARNING!
1
11
8 11
6
9
7
Risk of electric shock!
Improper handling of the charger may result in electric shock.
−− Keep the charger away from rain or moisture. Water seeping into the charger can increase the risk
of electric shock.
−− Charge the electrical tool only with the charger that comes with it.
−− Keep the charger clean. Dirt and impurities can pose a risk of electric shock.
−− Inspect the charger, cable and plug before every use. Do not use the charger if you notice any
signs of damage.
−− Do not open the charger yourself, and have it repaired only by a qualified specialist using original
spare parts. Damage to chargers, cables and plugs increases the risk of electric shock.
Risk of electric injury!
Rechargeable batteries contain flammable substances. If batteries are
handled improperly they may leak, become very hot, catch fire or
explode under certain circumstances. Improper handling may result in serious injury.
−− Do not heat the battery, and do not throw it on an open fire.
−− Do not expose the battery and stapler to direct sunlight.
−− Do not recharge non-rechargeable batteries.
−− The battery should not be taken apart, thrown onto fire, or short-circuited.
−− Store the battery out of the reach of children. If children or pets swallow rechargeable batteries,
immediately contact a physician.
−− Do not allow battery acid to come into contact with skin, eyes or mucous membranes. In the event
of contact with battery acid, immediately flush the applicable area with plenty of clean water and
consult a doctor immediately.
Risk of damage!
Improper handling of the stapler can damage it.
− Do not clean the stapler with abrasive solvents.
Operation instructions
Charging the rechargeable battery
• The battery is delivered partially charged. Charge the battery for at least three hours before
first use
• If the LED battery charge Indicator
lights up red during operation, this signals that the battery
capacity is less than 30%, and the battery should be recharged.
1. Insert the mains plug of the charging cable into a properly installed socket.
2. Insert the charging cable into the micro USB charging port . The LED on the battery
charging indicator will illuminate red.
3. Once the LED on the battery charge indicator illuminates green, the battery is fully charged. You can
now unplug the charging cable from the micro USB charging port.
• Use staple view window
you can ascertain whether there are still staples or nails
contained in the staple Cartridge .
NOTICE!