DA-AA
Rev. 5
DATE: 24 July 2008
Network Electronics AS, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 – Fax: +47 33 48 99 98
E-mail: [email protected] – Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
5
2. Specifications
Electrical Input:
Number of inputs:
2
Connector:
DB15
balanced
Impedance:
>
10k
ohms
Maximum Input Level:
+25 dBu
Common mode rejection:
>70dB
Electrical Output:
Number of outputs:
8
Connector:
DB25
balanced
(Tascam
DA88)
Frequency response:
20 Hz - 80 kHz ±0.2dB
Crosstalk:
-100
dB
THD+N:
> 100dB ref to 20 Hz-20 kHz @ 20dBu
Impedance:
40 ohms nominal. Maximum 55 ohms
Maximum Output Level:
+25 dBu
Output voltage balance ratio:
>30dB
Output common mode rejection:
>50dB
Switched gain tolerance:
0.1dB
Gain:
-12
to
+12
dB
Features
High quality audio distribution.
•
Configurable dual 1x4 or single 1x8 distribution amplifier.
•
Left/right swapping capability
•
Gain setting for professional and consumer equipment.
•
DIP switch gain compensation 10kohms / 600 ohms load
•
Precision gain adjustment
•
High common mode rejection on both inputs and outputs.
•
Inputs and outputs may be used with unbalanced equipment.
•
The input signal can be mixed to the other channel or vice versa.
Control Interfaces:
Card edge LEDs for voltage monitoring, RS-422 with open protocol, SNMP Agent and WEB interface
with GYDA controller. Control system for access to setup and module status with BITE (Built-In Test
Equipment) for use with GYDA Control System
Electrical
Power:
+5V
/
0.1
W,
±15V / 1.9W
