background image

 

 

      

MAN031 Rev Date 2/12/2007

 

 
 
 
 
 
 
 
 

Warranty Information 

 
The warranty period on this product (parts and labor) is two (2) years from the date of purchase.  Please contact Network 
Technologies Inc at

 (800) 742-8324

  (800-RGB-TECH) or 

(330) 562-7070

 or visit our website at 

http://www.networktechinc.com

 

for information regarding repairs and/or returns.  A return authorization number is required for all repairs/returns. 

 

COPYRIGHT 

Copyright © 2003-2007 by Network Technologies Inc.  All rights reserved.  No part of this publication may be reproduced, stored 
in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, 
without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202. 

 

CHANGES 

The material in this guide is for information only and is subject to change without notice.  Network Technologies Inc reserves the 
right to make changes in the product design without reservation and without notification to its users. 
 

TRADEMARK 

 RACKMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries.     
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for RACKMUX-UW15-4USB, RACKMUX-UW1






























Reviews: