NTI RACKMUX-VS17-T RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE
5
When connecting a CPU with DVI support (RACKMUX-DS17-T) to the single-link DVI port of the RACKMUX, use the DVI-D-6
(supplied with DS17 models) for the DVI video signal and the USB-AB-2M (supplied) for the USB connection between the CPU
and RACKMUX.
Figure 5- Cables for DVI video application
Connect Extra Device
On the front of the RACKMUX-VS17-T is an additional USB Type A port to be used, if desired, for an extra accessory. Any low or
full speed USB device may be connected to this port to be used. This port is fully compliant with USB 1.1 standard.
Note: If a USB keyboard or mouse is connected, operation of the RACKMUX-VS17-T keyboard or trackball may cause
unpredictable results. Do not try to use both mice or both keyboards at the same time.
Figure 6- Connect a USB device to the front (optional)
Note: If a USB 2.0 device is connected to the optional USB device port, it will operate at USB 1.1 speed.
CAMERA
PRINTER
SCANNER
Connect optional USB 1.1 or 2.0 device
FLASH DRIVE
FRONT VIEW OF RACKMUX-VS17-T
USB-B - Male
USB-A - Male
DVI-D-Male
USB-AB-2M
(supplied)
DVI-D-6
(supplied with DS17 models)
DVI-D-Male
USB Type B
Male
USB Type A
Male
(.5, 1, 3, and 5 meter cables also available)
(3 and 9 foot cables also available)
DVI-D-Male