manualshive.com logo in svg

Network Technologies RACKMUX-DS17-T, Installation And Operation Manual, Page: 7 / 20

Share
Download
Network Technologies RACKMUX-DS17-T Installation And Operation Manual Download Page 7

NTI RACKMUX-VS17-T  RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE 

 

4

Optional Telco 2-Post Mounting 

If the Telco 2-post mounting bracket kit

 

(NTI# RL-T15-TEL

)

 is to be used, secure the short and long brackets to each side of the 

drawer as shown in Fig. 2.    Apply 2 nuts (supplied) per bracket to secure the brackets to the drawer.   Apply two #10-32x3/4” 
screws  (supplied) per bracket to the post at the desired height.    Slots are provided in the brackets to make minor depth 
adjustments easy.    Be sure to properly tighten all nuts and screws before using the drawer.    
 

 

 

 

 

 

                                                  

                                               Figure 3- Mount to Telco post with optional mounting brackets 

 

Connect to a CPU 

 

The RACKMUX-VS17-T may be connected to a USB CPU with a VGA video port using the USB-AB-2M  and VEXT-6-MM cables 
provided as shown in Fig. 4.      
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Figure 4- Connect a SUN USB CPU 

 
 
 
 

USBVEXT-xx-MM

SUN USB CPU

 USB Type A Male     

 USB Type B

 Male     

    15HD Male
Video Connector
              

REAR VIEW OF RACKMUX-VS17-T

NTI

NETWORK
TECHNOLOGIES
INCORPORATED
Tel:330-562-7070
Fax:330-562-1999

1275 Danner Dr
Aurora, OH 44202

  www.networktechinc.com

Summary of Contents for RACKMUX-DS17-T





















Reviews:

No comments