background image

NTI RACKMUX-VS17-T  RACKMOUNT LCD MONITOR WITH SUN KEYBOARD AND TRACKBALL MOUSE 

 

17

 

TROUBLESHOOTING 

 

Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications.   We 
make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this 
product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise.    If the 
answer is not found in the chart, please check the FAQs (Frequently Asked Questions) at our website at 
http://www.networktechinc.com or contact us directly for help at 1-800-742-8324 (800-RGB-TECH) in US & Canada or 1-330-562-
7070 worldwide.    We will be happy to assist in any way we can.  

 

Problem/Message 

Cause 

Solution 

"OUT OF FREQUENCY" 

Input signal is outside the supported 
range 

Lower video frequency to be within specified range 

"POWER SAVER MODE" 

The input signal is not present.  This 
message will disappear after 5 seconds. 

Check all cable connections- verify that they are 
secure 

"NO SIGNAL" 

The input signal is not present 
immediately after power ON.   

Check all cable connections- verify that they are 
secure 

"AUTO CONFIGURATION" 

The LCD monitor is configuring itself for 
proper communication with the CPU.  

No action is necessary.   

Keyboard/trackball not 
functioning 

USB cable is not properly connected 

Check USB cable connection between the RACKMUX 
and the computer.   Make sure it is connected to a 
working USB port at the CPU.   

Front panel USB port is not 
working 

USB cable is not properly connected 

Check USB cable connection between the RACKMUX 
and the computer.   Make sure it is connected to a 
working USB port at the CPU.   

Keys pressed on the keyboard 
do not yield the expected result 

“Fn” function is locked ON. 

Check to see if the Fn LED is illuminated.  If so, press 
the “Fn” key twice quickly to unlock the function.  

LCD is not displaying image 

 

Image out of range 

 

LCD Auto-Shut OFF button is 
depressed 

 

LCD is powered OFF 

 

Lower the resolution 

 

Make sure nothing is resting on the button 

 

 

Turn power to LCD ON 

 
 

INDEX 

accessory, 5 

F

eatures and Functions, 2 

Fn key, 10, 12 

F

unction key, 10 

Keyboard LEDs, 10 

N

umber Pad, 11 

numeric keypad, 13 

Options, 1 
OSD control buttons, 7 

O

SD Menu, 7 

Power Key- SUN, 12 
specifications, 15 

T

elco mount, 4 

 
 
 
 

WARRANTY INFORMATION 

 
The warranty period on this product (parts and labor) is two (2) years from the date of purchase.  Please contact Network 
Technologies Inc at

 (800) 742-8324

  (800-RGB-TECH) or 

(330) 562-7070

 or visit our website at 

http://www.networktechinc.com

 

for information regarding repairs and/or returns.  A return authorization number is required for all repairs/returns. 
 
 
 
 
 
 
 
 
                                                                                                                                                              MAN083    Rev. 11/15/07 
 

Summary of Contents for RACKMUX-DS17-T





















Reviews: