13
The list below describes the command functions available from the keyboard within the OSD mode of control after entering into
Command Mode:
Function:
Keystroke:
Select the previous port
Select the next port
Enable/disable Scan Mode
Enable/disable Broadcast Mode
Enter Edit Mode
(Only available if administrator
is logged in)
Enter Change Settings Menu
Enter Maintenance Mode
Display Help Menu
Figure 10- Additional Command Mode options
Select the first port on the switch
Select the last port on the switch
Select a specific port
Enter Search Mode, add a character
to search string and select the CPU’s
name that matches best.
Switch to a selected port
Update Configuration
Display port information
Exit Command Mode
S
Ctrl
+
E
Ctrl
+
M
Ctrl
+
F1
End
Enter
Home
Esc
B
Ctrl
+
T
Ctrl
+
A-Z
0-9
(Type any alphabetical or numeric character)
Note: use is case sensitive
P -
-
(Pxx would be P01, P02, etc.)
(0-9)
x
(0-9)
x
Ctrl
+
Note: When the user presses and holds the
<Ctrl> key from the first Command Mode
image, the additional options of
Maintenance, Port, and Edit will appear.
(See Fig.10)
Fig. 9
Tab
+
Ctrl
(Use this command to update the information
describing the structure of the cascaded
switches. Used if a slave is powered-ON or
OFF at any time after initial startup.)
F3
(Display information about the selected port. When pressed,
a window displays the port name and its position in the configuration
structure by level and port number.)
Summary of Contents for NTI UNIMUX UNIMUX-USBV-4
Page 15: ......
