background image

Wireless USB Adapter

37

Network Everywhere

®

36

Roaming - In an infrastructure mode wireless network, this refers to the abili-
ty to move out of one access point's range and into another and transparently
reassociate and reauthenticate to the new access point.  This reassociation and
reauthentication should occur without user intervention and ideally without
interruption to network connectivity.  A typical scenario would be a location
with multiple access points, where users can physically relocate from one area
to another and easily maintain connectivity.

SSID (Service  Set  Identifier) - An identification name that wireless devices
use to make connections. In order for wireless devices to communicate, they
must all be set to the same channel and they all must use the same SSID. For
instance, if you are using an access point to connect two computers using wire-
less devices, the access point and each of the wireless devices must use the
same SSID. Even if they are set to the same channel, they cannot communicate
unless the SSID is the same. 

Static IP Address - A permanent IP address that is assigned to a node in a
TCP/IP network. 

Subnet Mask - The method used for splitting IP networks into a series of sub-
groups, or subnets. The mask is a binary pattern that is matched up with the IP
address to turn part of the host ID address field into a field for subnets. 

TCP (Transmission Control Protocol) - A method (protocol) used along with
the IP (Internet Protocol) to send data in the form of message units (datagram)
between network devices over a LAN or WAN. While IP takes care of handling
the actual delivery of the data (routing), TCP takes care of keeping track of the
individual units of data (called packets) that a message is divided into for effi-
cient delivery over the network. TCP is known as a “connection-oriented” pro-
tocol due to requiring the receiver of a packet to return an acknowledgment of
receipt to the sender of the packet resulting in transmission control.

TCP/IP (Transmission Control Protocol/Internet Protocol) - The basic com-
munication language or set of protocols for communications over a network
(developed specifically for the Internet).  TCP/IP defines a suite or group of
protocols and not only TCP and IP.

UDP (User Datagram Protocol) - A method (protocol) used along with the IP
(Internet Protocol) to send data in the form of message units (datagram)
between network devices over a LAN or WAN. While IP takes care of handling
the actual delivery of the data (routing), UDP takes care of keeping track of the
individual units of data (called packets) that a message is divided into for effi-

LAN.  In infrastructure mode, the wireless devices communicate with each
other and to a wired network by first going through an access point.  An infra-
structure wireless network connected to a wired network is referred to as a
Basic Service Set (BSS).  A set of two or more BSS in a single network is
referred to as an Extended Service Set (ESS).  Infrastructure mode is useful at
a corporation scale, or when it is necessary to connect the wired and wireless
networks.

IP Address - In the most widely installed level of the Internet Protocol (IP)
today, an IP address is a 32-binary digit number that identifies each sender or
receiver of information that is sent in packet across the Internet. When you
request an HTML page or send e-mail, the Internet Protocol part of TCP/IP
includes your IP address in the message (actually, in each of the packets if more
than one is required) and sends it to the IP address that is obtained by looking
up the domain name in the Uniform Resource Locator you requested or in the
e-mail address you're sending a note to. At the other end, the recipient can see
the IP address of the Web page requester or the e-mail sender and can respond
by sending another message using the IP address it received. 

IPCONFIG - A utility that provides for querying, defining and managing IP
addresses within a network.  A commonly used utility, under Windows NT and
2000, for configuring networks with static IP addresses.

ISP - An ISP (Internet service provider) is a company that provides individuals
and companies access to the Internet and other related services such as Web site
building and virtual hosting. 

LAN - A local area network (LAN) is a group of computers and associated
devices that share a common communications line and typically share the
resources of a single processor or server within a small geographic area (for
example, within an office building). 

MAC Address - The MAC (Media Access Control) address is your computer’s
unique hardware number. 

mIRC - mIRC runs under Windows and provides a graphical interface for log-
ging onto IRC servers and listing, joining and leaving channels.

Network Mask - Also known as the “Subnet Mask.”

Plug-and-Play - The ability of a computer system to configure expansion
boards and other devices automatically without requiring the user to turn off
the system during installation.

Summary of Contents for NWU11B


























Reviews: