Wireless USB Adapter
11
Network Everywhere
®
10
6. For Windows 2000, you may be informed that a digital signature has not
been found (see Figure 5-7). This is normal, and it has been verified that the
Adapter does work with Windows 2000. Click the Yes button to continue.
Windows will begin installing the driver files. If Windows asks you for the
original Windows CD-ROM, insert the CD-ROM, and direct Windows to the
proper location for the CD-ROM (e.g., D:\).
7. After the files have been successfully copied, the screen in Figure 5-8 will
appear. Click the Finish button.
Proceed to “Chapter 6: Hardware Installation.”
Figure 5-7
Figure 5-8
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc
Mode, select the correct operating channel for your network. The channel
you choose should match the channel set on the other devices in your wire-
less network. Click the Next button, and go to Step 5. Click the Back button
to change any settings.
5. The Setup Wizard will ask you to review your settings before it starts to copy
files. Click the Next button to save these settings, or click the Back button
to change any settings.
Figure 5-5
Figure 5-6
