Modular Telecom Router
Rev. 4
For further instructions on router configuration, please see the online
documentation in the System Configurator.
3.3
Power Supply module
Each Modular Telecom Router frame comes with either one or two power
supply modules. One power supply is standard, dual redundant power supply
is an option.
The first power supply module is inserted in the
left
slot (
A
), and the second is
inserted in the
right
slot (
B
). (The power module
A
is pulled out in the figure
below).
3.3.1
Module insertion
In order to insert a power supply module one must insert the module via the
special plastic guide rails into its position. Once the module is inserted, fix the
module by lifting up the handle on the front and pushing it to the upright
position.
3.3.2
Module removal
In order to remove a power supply module, one must pull down the handle
on the front downwards to a horizontal position, and pull the module out
with the bar on top of the power module.
3.3.3
How to connect power to the Modular Telecom Router
On the back of the frame, there are four power connectors. Two of these
connectors are for AC mains connection, and the other two connectors are for
DC battery connection.
Use an IEC 320 connector to connect AC mains to the Modular Telecom
Router frame.
15
