Network Electronics VikinX T128128-140, Hardware Manual

Page: 14 / 33

Modular Telecom Router Rev. 4
3 Modules inside the Modular Telecom Router
In order to get an overview of the parts that form the Modular Telecom
Router this chapter will highlight some of the main components.
GYDA-VX SysCon (not shown in picture) Power Supplies X-point Modules
3
3.1 How to access the modules
All active modules are accessible through the front of the router frame. If
service or inspection is required, open the unit from the front. The door may
be removed for easy access to the modules.
An important feature of all the modules in the Modular Telecom Router frame
is that they are all hot-swappable. The user does not have to turn off the
power in order to remove/reinstall/replace a module with active components
inside the Modular Telecom Router.
3.2 How to configure the router and modules
Setting up and configuring the router and its modules is done with the
System Configurator software. The System Configurator is shipped with the
router, or could be downloaded from
www.network-electronics.com .
3
The picture shows a 9RU frame. The 5RU misses the upper two X-point Modules.
14