netvox Z809A, User Manual

Page: 7 / 14

6
The related Attribute ID of Electrical Measurement Cluster ID:
 Current Attribute ID: 0x0508
 Voltage Attribute ID: 0x0505
 Power Attribute ID: 0x050B
 Power Factor Attribute ID: 0x0510
The command to reset power consumption summation: 0xE0. The format is:
Bits:8 16 8 8 8
Frame
control Manufacturer
code
Transaction
Sequence
number Command
identifer Frame payload
Action
0x05 0x109F 0xe0 0x00
(clusterid
：
0x0702
，
Action
：
0x00)
5-8. Report Configuration for Developer Only
After the device receives ConfiugreReport (Max! = 0xFFFF) command, if the configuration is successful, it will
immediately issue a Report command and then it will report according to report setting.
After powering on, Z809A will detect battery voltage, if the device report has been previously configured, it will
issue 1 or 2 reports within 1-60 seconds randomly on the device, and thereafter it will report according to the
configuration.
Report setting table
：
Min Interval
(Unit:second)
Max Interval
(Unit:second)
Reportable
Change
Change rate≥ Reportable
Change
Change rate
＜
Reportable Change
1-65534 1-65534
≠ 0
To report per Minimum
interval
To report per Maximum
interval
0
To report per Minimum
interval
To report per Minimum
interval
0 1-65534
≠ 0 To report instantly
To report per Maximum
interval
0 To report per second To report per second
1-65534 0
≠ 0
To report per Minimum
interval
No report
0
To report per Minimum
interval
To report per Minimum
interval
0 0
≠ 0 To report instantly No report
0 To report per second To report per second
Any 65535 Any Stop reporting
65535 Any Any Stop reporting
Note
：
(1) It is not suggested to set:
Min Interval =0,