9
control code
Sequence
number
identifier
Count NodeID
RSSI … NodeID RSSI
0x05
0x109F
0x5F
Byte 2byte Signed
(Clusterid
：
0x FE60)
5-8. HeartBeat Technique
In a security system, it is important that Zone devices report the conditions to the central security unit (the
CIE device). To meet this need, Netvox came up with a technique called “
HeartBeat
”.
Right after Z308 enrolls to a security system, it sends a HeartBeat signal to the CIE device. Afterward, it will
send HeartBeat data every hour by default settings.
5-9. Battery
When the operating voltage is lower than 2.1V, the indicator will flash
red
once
. Z308 will send a low-power
report to the ZigBee network.
The related data:
y
Power configuration cluster (ID:0x0001)
y
Battery voltage attribute (ID:0x0020)
5-10. Restore to Factory Setting
To restore it to factory setting, please follow the steps:
Step1. Press and hold the
Panic Button
or 15 seconds.
Step2. Release the button after the indicator shows fast
red
flashes.
Step3. After 10
red
flashes, it will go into turn-off mode. The indicator will be Off.
6. Home Automation Clusters for Z308
A cluster is a set of related attributes and commands which are grouped together to provide a specific function. A
simple example of a cluster would be the On/Off cluster which defines how an on/off switch behaves. This table
lists the clusters which are supported by Z308.
1.End Point(s)
：
0x01:
2.Device ID
：
IAS Zone
（
0x0402
）
3.EndPoint Cluster ID
Cluster ID for Z308
Server side
Client side
EP 0x01 (Device ID: IAS Zone(0x0402) )
