netvox R72608, User Manual

Page: 9 / 12

8
6. Installation
6.1 RA0708
RA0708 does not have a waterproof function. After the network joining is completed, please place it indoor.
6.2 R72608
R72608 product is waterproof. After the network-joining is completed, please leave it outdoors.
(1) In the position to be installed, loosen the U-shaped screw of the bottom of the R72608 and the mating washer nut, and fix the
U-shaped screw through the appropriate size cylinder on the R72608 fixed strut piece. Install the washer nut in order, lock the nut
till R72608 body is stable and does not shake.
(2) At the upper side of the fixed position of R72608, loosen the two U-shaped screws on the side of the solar panel and the mating
washer nut. Fix the U-shaped screw through the appropriate size cylinder on the main bracket of the solar panel, and install the
gasket in sequence. Lock nut till the solar panel is stable and does not shake.
(3) Adjust the angle of the solar panel. After the adjustment is completed, lock the nut.
(4) Connect the R72608 top waterproof cable to the solar panel wiring and lock it tight.
(5) R72608 has a battery compartment inside. Users can buy and install rechargeable 18650 lithium battery, 3 sections totally. A single
rechargeable lithium battery voltage is 3.7V, and the capacity is recommended 5000mah.
The installation of rechargeable lithium battery steps are as follows:
1: Remove the four screws around battery cover
2: Insert three 18650 lithium batteries. (Please make sure the battery positive and negative)
3: Press the activation button on the battery pack for the first time.
4: After activation, close the battery cover and lock the screws around battery cover.
activation button