4
4.
Set up Instruction
On/Off
Power on
Insert batteries. (users may need a screwdriver to open)
Insert two sections of 3V CR2450 button batteries and close the battery cover.
Turn on
Press any function key and the green and red indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds and the green indicator flashes
20 times.
Power off
Remove Batteries.
Note:
1.
Remove and insert the battery, the device memorizes previous on/off
state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference
of capacitor inductance and other energy storage components.
3. Press any function key and insert batteries at the same time, it will enter
engineer testing mode.
Network Joining
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Function Key
Press and hold for 5 seconds
Restore to factory setting / Turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
