NetUP HDMI Encoder 8x User’s Manual
33
/
44
Addr: 119311, Russia, Moscow, Ulofa Palme bldg.1, sect 7
Web: http://netup.tv
Phone: +7 (495) 510-10-25
E-mail: [email protected]
Users can operate PID filter in this table by checking the check boxes of corresponding items
and click CONFIRM to effect.
Refresh:
getting PID filter table from the device
Setting:
submitting the PID filter table to the device
Check All:
selecting all the selections of the list
After user selects one PID in the table, then the corresponding output PSI/SI table will not be
sent to the output stream.
4.3.3.2 PID Pass
User can decide to bypass the inputting PID as needed in this interface.
In some occasions, there are some PIDs which won’t belong to any program, such as EPG, NIT
tables, and so on, but user just wants to pass them through the multiplexing module without
changing anything. This is the main purpose of this function.
The display will show as below when user clicks “Add” button.