15
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
My-Netti.com
6.3 FRONT CASTORS
Are equipped with quick release axle.
To take off:
• Press the release button on top of the front fork
bearing house – located under the silicon cap.
To mount:
• Lead the quick release axle into the bearing
house. Pull the fork slightly to ensure that the
fork is fully locked.
6.2 MAIN WHEEL
Netti 4U BASE is delivered with 16” main wheel with
drum brake installed from your dealer.
To mount a 24” main wheel, the hub bushing must
be moved to correct hole in the main wheel bracket.
Then the quick release bolt is inserted through the
centre of the main wheel and into the hub bushing
while pressing the knob in centre.
12” & 16” main wheels with drum brake. are installed
by your dealer.
To check that the 24” main wheel is properly
attached to the hub, remove the finger from
the central knob and pull at the main wheel.
If the main wheel doesn’t lock, do not use the
wheelchair but contact your dealer.
Sand and sea water (salt used for gritting in
the winter) can damage the bearings of the
main wheels and front castors. Clean the
wheelchair thoroughly after exposure.
