19
Model:
Netti 4U BASE
Language:
English
Version:
2022-03
My-Netti.com
6.9 MOULDED SEAT AND
SEAT CUSHION
The moulded seat is to be fixed to the plywood seat
plate by screws with regular nuts or claw nuts. Then
the seat plate must be fixed to the chair frame.
The seat cushion is fixed on the wheelchair with
Velcro.
It is very important to place the cushion in
the wheelchair before use.
The cushion cover is washable and reusable.
6.8 ANTI-TIPS
The anti-tips should be mounted according to the
mounting description which is enclosed with the
chair upon arrival.
• Use of the anti-tip.
• Pull the anti-tip out.
• Turn it up or down 180°.
• Lock it in position.
ADJUSTING THE HEIGHT OF THE ANTI-TIPS
The anti-tip can be adjusted in two fixed positions.
The short position is for 12” & 16” main wheels and
24” in upper position. The long position is for 24”
main wheels in lower position.
• Unfix the screw in the adjustable extension piece
as shown in picture below.
• This extension piece has two holes. Place it in the
required position and tighten the screw.
5 mm Allen-key.
The anti-tip should always be used for the
safety of the user.
