15
Model:
Netti Side supports
Language:
English
Version:
2022-02
My-Netti.com
Before the screws are tightened, you can choose the
angle of the clamp and thereby increase or decrease
the stability.
5 mm and 6 mm Allen key and
eventually a sharp knife for
cutting excess velcro
ADJUSTING THE SIDE SUPPORT LENGTH:
• Open the side support cover,
• Push the padding forward till you see the screws
holding the side support arm
• Loosen the screws and slide the side support
plate to desired position
• Tighten the screws, reposition the foam and close
the cover.
5 mm Allen key
REMOVAL OF THE SIDE SUPPORT FOR
TRANSFER:
To release the side support and swing it outward,
pull the release button out.
