13
Model:
Netti Side supports
Language:
English
Version:
2022-02
My-Netti.com
5.2 MOUNTING TO THE BACK TUBE
• Mount the side support fixing bracket in required
height on the backrest tube.
• Fix both screws.
• For the Netti models loosen the straps on the
velcro backrest fabric and twist the backrest
material around the backrest tube to enable the
adapter to slide on.
• Adjust the straps back to position. It might in
some cases with very tight fabric be necessary
to make a cut in the backrest fabric to fit the
adapter. Alternatively, you can order a velcro with
cut (Item 44992 or 44993)
• Slide the side support into the hole in the adapter
and tighten the clamping screw
ADJUSTING THE SIDE SUPPORT LENGTH:
• Open the side support cover,
• Push the padding forward till you see the screws
holding the side support arm
• Loosen the screws and slide / move the side
support plate to desired position
• Tighten the screws, reposition the foam and close
the cover.
5 mm Allen key
ADJUSTING THE SIDE SUPPORT SIDEWAYS:
The depth is adjusted by loosening the Italian grip
and pushing the horizontal side support rod into the
fixing bracket.
REMOVAL OF THE SIDE SUPPORT FOR
TRANSFER:
Loosen the Italian grip and pull the side support out
of the mounting bracket.
